1/2″ Stainless Wire Rope 6×19 IWRC

  • Break Strength 22,800 lbs.
  • Sold in Continuous ft. Length
  • Type 304 Stainless Steel

Please Call 1-888-912-1004 For Up-To-Date Pricing

Description

1/2″ 6×19 Class IWRC Stainless Steel Wire Rope Type 304

  • Break Strength 22,800 lbs.

6×19 Class IWRC (Independent Wire Rope Core). 6 strands consisting of 19 wires around a 7×7 core.
Improved plow steel. Right hand, regular lay. Stainless steel type 304.
Meets federal specification RR-W-410 (as revised).

More Sizes Available

1/2 inch 6×19 stainless steel wire rope is a classification of cable often referred to as 6×25 or SSAC (Stainless Steel Aircraft Cable). Mainly used around salt water and marine environments where corrosion most likely will occur. Type 304 stainless cable is resistant to rust, corrosion, & moisture. Strong & durable, this rope is also quite flexible. Stainless is commonly used in the food processing industry because of it’s anti-bacterial properties.

Stainless Steel Wire Rope is Best Suited For:

  • Marina Decks & Docks
  • Sail Boat Rigging
  • Corrosive Outdoor Environments
  • Food Industry
  • Water Treatment Plants

Only use compatible rated fittings with this cable (clips, thimbles, shackles, etc.). Strict breaking-in procedure & proper handling during use are extremely important. Inspect carefully & diligently. Wire rope must be inspected before & after use by a competent person(s).

Visit our About Wire Rope Page for more info.

Cable MUST be taken out of service if:

  • Broken Strands or Defects
  • Kinked or Crushed Strands
  • Milked or Bird Caged Deformities
  • Chemical or Heat Damage

Proper handling & storage:

  • Keep rope from physical abuse, weather, and corrosive materials.
  • Avoid cable from any foreign contaminants.
  • Do not kink, bend or twist.
  • Never drag or drop.

Additional information

Weight .46 lbs

Title

Go to Top