Description
9/16″ 6×19 Class IWRC Stainless Steel Wire Rope Type 304
- Break Strength 28,500 lbs.
6×19 Class IWRC (Independent Wire Rope Core). 6 strands consisting of 19 wires around a 7×7 core.
Improved plow steel. Right hand, regular lay. Stainless steel type 304.
Meets federal specification RR-W-410 (as revised).
9/16 inch 6×19 stainless steel wire rope is a classification of cable often referred to as 6×25 or SSAC (Stainless Steel Aircraft Cable). Mainly used around salt water and marine environments where corrosion most likely will occur. Type 304 stainless cable is resistant to rust, corrosion, & moisture. Strong & durable, this rope is also quite flexible. Stainless is commonly used in the food processing industry because of it’s anti-bacterial properties.
Stainless Steel Wire Rope is Best Suited For:
- Marina Decks & Docks
- Sail Boat Rigging
- Corrosive Outdoor Environments
- Food Industry
- Water Treatment Plants
Only use compatible rated fittings with this cable (clips, thimbles, shackles, etc.). Strict breaking-in procedure & proper handling during use are extremely important. Inspect carefully & diligently. Wire rope must be inspected before & after use by a competent person(s).
Visit our About Wire Rope Page for more info.
Cable MUST be taken out of service if:
- Broken Strands or Defects
- Kinked or Crushed Strands
- Milked or Bird Caged Deformities
- Chemical or Heat Damage
Proper handling & storage:
- Keep rope from physical abuse, weather, and corrosive materials.
- Avoid cable from any foreign contaminants.
- Do not kink, bend or twist.
- Never drag or drop.
Additional information
| Weight | .59 lbs |
|---|
Centrally located in the Midwest
Get just what you need for any project