- Break Strength 33,600 lbs.
- Sold in Continuous ft. Length
Please Call 1-888-912-1004 For Up-To-Date Pricing
5/8″ 19×7 Rotation Resistant Wire Rope
Description
5/8″ 19×7 Rotation Resistant Wire Rope
19×7 Construction (1-6) WC, Preformed, Right Regular Lay, Extra Improved Plow Steel.
EIPS (extra improved plow steel) 5/8″ 19×7 rotation resistant wire rope is typically used where a single-part hoist rope is used to lift a free load, or will resist block rotation in a multi-part system.
The inner six strands are laid to the left around the core while the outer twelve strands are laid to the right. When under load, opposing rotational forces are created between the two layers. Meets federal specification RR-W-410 (as revised).
Only use compatible rated fittings with this cable(clips, thimbles, shackles, etc.) Strict breaking-in procedure & proper handling during use are extremely important. Inspect carefully & diligently. Wire rope must be inspected before & after use by a competent person(s).
Visit our About Wire Rope Page for more info.
Wire rope MUST be taken out of service if:
- Broken Strands or Defects
- Kinked or Crushed Strands
- Milked or Bird Caged Deformities
- Chemical or Heat Damage
Proper handling & storage:
- Keep rope from physical abuse, weather, and corrosive materials.
- Avoid cable from any foreign contaminants.
- Do not kink, bend or twist.
- Never drag or drop.
Additional information
| Weight | .71 lbs |
|---|
