3/4″ Stainless Steel Wire Rope 6×19 IWRC

Description

3/4″ 6×19 Class IWRC Stainless Steel Wire Rope Type 304

• Break Strength 49,600 lbs.

6×19 Class IWRC (Independent Wire Rope Core). 6 strands consisting of 19 wires around a 7×7 core.
Improved plow steel. Right hand, regular lay. Stainless steel type 304.
Meets federal specification RR-W-410 (as revised).

More Sizes Available

3/4 inch 6×19 stainless steel wire rope is a classification of cable often referred to as 6×25 or SSAC (Stainless Steel Aircraft Cable). Mainly used around salt water and marine environments where corrosion most likely will occur. Type 304 stainless cable is resistant to rust, corrosion, & moisture. Strong & durable, this rope is also quite flexible. Stainless is commonly used in the food processing industry because of it’s anti-bacterial properties.

Stainless Steel Wire Rope is Best Suited For:

• Marina Decks & Docks
• Sail Boat Rigging
• Corrosive Outdoor Environments
• Food Industry
• Water Treatment Plants

Only use compatible rated fittings with this cable (clips, thimbles, shackles, etc.). Strict breaking-in procedure & proper handling during use are extremely important. Inspect carefully & diligently. Wire rope must be inspected before & after use by a competent person(s).

Visit our About Wire Rope Page for more info.

Cable MUST be taken out of service if:

• Broken Strands or Defects
• Kinked or Crushed Strands
• Milked or Bird Caged Deformities
• Chemical or Heat Damage

Proper handling & storage:

• Keep rope from physical abuse, weather, and corrosive materials.
• Avoid cable from any foreign contaminants.
• Do not kink, bend or twist.
• Never drag or drop.