1/2″ 6×37 FC Wire Rope (Fiber Core)

Description

1/2″ 6×37 Class FC Bright Wire Rope (Fiber Core)

• Break Strength 21,400 lbs.

6×37 Class FC (Fiber Core). 6 strands consisting of 31-41 (depending on size of cable) wires around a fiber rope core. Usually polypropylene. Extra improved plow steel. Right hand, regular lay. A-1 lubrication.
Meets federal specification RR-W-410 (as revised).

More Sizes Available

1/2 inch 6×37 FC wire rope is a classification of cable often referred to as 6×36 construction. A general purpose preformed cable known for it’s superior flexibility & strength. This cable is more flexible around pulleys, drums & winches than a similar size wire center core. More flexible, but not as abrasion resistant as a 6×19 or 6×25 construction fiber core center.

Center fiber core strand is either a polypropylene or natural fiber rope which allows A-1 lubrication to store & permeate the outer cables. The drawback is less strength & internal crushing of fiber cores compared to wire center cores.

6×37 Class Fiber Core Cable Best Suited For:

• Pulleys
• Winches
• Sheaves & Drums
• Hoisting Lines
• Cranes
• Logging or General Construction Applications

Only use compatible rated fittings with this cable (clips, thimbles, shackles, etc.). Strict breaking-in procedure & proper handling during use are extremely important. Inspect carefully & diligently. Wire rope must be inspected before & after use by a competent person(s).

Visit our About Wire Rope Page for more info.

Wire rope MUST be taken out of service if:

• Broken Strands or Defects
• Kinked or Crushed Strands
• Milked or Bird Caged Deformities
• Chemical or Heat Damage

Proper handling & storage:

• Keep rope from physical abuse, weather, and corrosive materials.
• Avoid cable from any foreign contaminants.
• Do not kink, bend or twist.
• Never drag or drop.